Warning: This product may contain a chemical and/or wood dust which is known to the state of California to cause cancer and/or birth defects and/or other reproductive harm.
We at “Hoot” Judkins pride ourselves on our selection of quality real wood furniture. In fact, we have the widest selection of wood furniture in Northern California ranging from promotional solid pine collections to hand crafted heirloom quality furniture.
will range anywhere from 45 to 100, lowest to highest. If the item
scores less than 45, we refuse to stock it in our stores because of poor
materials, craftsmanship and quality.We use the following categories to
give each item a score based on the following
• Type of wood
• Construction material
• Building techniques
• Quality of parts and hardware
• Quality of finish
Quality is determined by the durabililty of the wood. Very hard woods earn the highest quality marks. Softer woods earn less points because they are more susceptible to dents and dings.
Pieces can be constructed of solid wood, plywood or particle board. Solid wood means the entire piece is constructed of solid wood. Plywood is an affordable alternative to solid wood where sheets of real wood are layered making the piece extremely strong and resistant to cracking, bending, warping and shrinking. Particle board is not nearly as strong as solid or plywood and is harder to repair damage to the piece. Typically the terminology “select veneers” means veneer over particle board.
Building techniques vary widely from time-tested heirloom construction to the latest advancements in ball bearing drawer glide technology and precision channel drawer construction. We evaluated many building methods such as English dovetails, French dovetails, dado, and tongue and groove methods. We inspect chairs to determine longevity and integrity. Basically, we ask if the piece is built to last.
Finishes can help determine how long a piece will last. Quality furniture must withstand sunlight, humidity, everyday use and “child abuse”. A beautiful and durable finish should stand the test of time. Our most durable finishes are designed keeping all these factors in mind.
When manufacturing, the parts used to complete a piece have a dramatic effect on the quality of the piece. For example, we evaluate the quality of the dowels, drawer glides, table glides, the hardware used to assemble a bed. Even simple features such as proper lighting, cord management and functionality all are considered.